Leak Repair & Maintenance

SYNTHOGLASS UP/NP

SynthoGlass® UP (under pressure) and SynthoGlass® NP (non-pressurized) kits are packaged and delivered as complete systems, enabling quick repairs for a wide range of applications on pipes up to 10 inches in diameter.
SynthoGlass® NP Repair System combines the original SynthoGlass® product with extremely chemically resistant SynthoSteel™ to deliver a pipe repair system specifically designed for depressurized pipe repair applications on copper, steel, SS, PVC, FRP, clay, concrete, rubber, and more. It has the geometric flexibility to repair joints, tees, couplings, pinholes, and cracks.
SynthoGlass® UP takes repairs to the next level. Packaged with an additional component – uniquely designed Pressure Sealing Rubber Tape – it extends the capabilities of SynthoGlass® NP, allowing for the repair of live leaks up to 60 psi (4.1 bar) pressure on joints, tees, couplings, and pinholes.

Features:
  • Supplied as a complete kit
  • Quick and easy installation
  • Good chemical resistance range
  • Heat resistant
  • Designed with SynthoGlass® pre-impregnated composite and chemically resistant SynthoSteel™
  • NSF61 and BS6920 approved for potable water when SynthoSteel™ is used as the primary sealant
Applications:
SynthoGlass® NP repairs depressurized leaks on:
  • Joints, tees, and couplings
  • Pinholes
  • Cracks
SynthoGlass® UP repairs leaks under pressure to 60 psi (4.1 bar) on:
  • Joints, tees, and couplings
  • Pinholes

TRIDENTWRAP

TridentWrap® riser reinforcement kit repairs non-leaking natural gas risers exhibiting wall loss up to 80% at <300 psi (20.7 bar) while eliminating atmospheric corrosion. With 8 layers, this system enables corroded piping to be repaired without shutdown. It is prepackaged to conform to ASME PCC-2, ASME B31, ISO 24817, DOT, API, and CSA Z662 standards for nonmetallic reinforcing solutions

Features:
  • Supplied as a complete kit
  • Quick and easy installation
  • With proper training and surface preparation, this product conforms to ASME PCC-2, ASM B31, ISO 24817, DOT, API, and CSA Z662 standards for nonmetallic reinforcing solutions.
Applications:
  • Corrosion repair on natural gas piping
  • Atmospheric corrosion
  • Riser reinforcement
  • New or old riser assemblies
  • Corrosion protection
  • Coating repair
  • Integrity management
  • Air to soil interface
Benefits:
  • Ready to use
  • Conforms to irregular shapes
  • Saves time
  • Simple application
  • Prevents future external corrosion
  • No pipe replacement
  • No shutdown or relights
  • No special tools to install
  • No hot work
  • No contractor required
  • No environmental hazards

TRIDENTSEAL

TridentSeal® is a live natural gas repair system that permanently seals active leaks, up to 60 psi (4 bar) without interrupting service. It is pre packaged in a kit with enough material to repair a pinhole or threaded fitting on pipe diameters up to 6 inches. Larger repairs can be installed by using more than one kit. This product has undergone third-party testing for long-term pressure retention at 90 psi (6 bar).

Features:
  • Supplied as a complete kit
  • Quick and easy installation
Applications:

Live natural gas leaks above- and below-grade on:

  • Threaded fittings
  • Manifolds
  • Meter sets
  • Pinholes
  • Main lines
Benefits:
  • Ready to use
  • Conforms to irregular shapes
  • Saves time
  • Instant, permanent repair
  • No VOCs
  • No hot work
  • No mixing or mess
  • No pipe replacement
  • No contractor required
  • No shutdown or relights
  • No special tools to install
  • No environmental hazards